MOTOREX PROWELD 254

Application
Motorex Proweld 264 welding protection prevents adhesion of welding splashes on the welded material and on the welding tools. On completion of the welding, it can be easily removed with a cloth and water and leaves no residues whatsoever. Its biodegradability is so high that the rinsing water can be flushed away directly into the normal sewage installations.

Motorex Proweld 264 welding protection is suitable for all types of welding on structural steel, stainless steel, aluminium and non-ferrous metals. Excellant results are achieved when used on sheet metal and tubes while laser cutting. It effectively protects nozzles of flame cutters of all types, thus guaranteeing a clean cut.

Advantages:
- free from solvents
- uninflammable
- can be washed off easily
- biodegradable
- no sticky residues
- no problems for subsequent treatments such as galvanizing,enamelling, etc.
- short corrosion protection

Application:
Use a spray gun to evenly spray on as a very thin coat of Motorex Proweld 264 welding protection on the desired surface. If an air pressure of 5 bar is used, you will get a homogenous and complete protection film. Hand dispensers are not suitable as Motorex Proweld 264 will not be applied thinly enough due to low pressure.

Attention: Local overdosage on the work piece (for instance drops of agent) can lead to porous weld seams, as evaporating Motorex Proweld 264 can harm the protective covering.

The welding protectant is also available as a spray (with airbag) : Motorex Proweld spray.

Data:
Colour                                                                  light yellow
Density at 20°C              1,025 g/ml
Flash point                                                           uninflamable
pH-value                                                               5.2

Notes
ADR/SDR : not classified Non-toxic

German water hazard class : WGK 1