Precision Update Page

This issue we are featuring the NEW
FRAISA NOVOSYS HSC Modular Milling Tool System for Die and Mould Machining	AND	FRAISA 'HX' Carbide Cutters for Mould Machining

Novosys is a modular milling tool system which is built up on the basis of the 'construction kit' principle. For each tool diameter, shanks of different lengths can be combined with 3 types of cutters.

The geometry of the cutters matches Multicut H, Multispeed and Spericut, the tools from Fraisa which have been specially developed for mould and die production.

The tools are fitted on to shanks made of a special alloy with the help of a Fraisa clamping system (patent applied for). All shanks are equipped with the Fraisa LTC hard coating to protect them against wear and damage. Mould and die manufacture is one of the main areas of application for Novosys.

This System is approved for RPM's up to 40,000. Recommended cutting data can be found on pages 16/17 of the Novosys booklet.

Costs are 25% to 50% lower than solid carbide
Precision, geometry and high number of cutting edges are identical with solid carbide.
Changing the cutting edges is quick and simple.
Productivity is substantially higher than indexable inserts.
NOVOSYS - combines the advantages of indexable inserts and solid carbide,

MULTICUT - H

nv-mcH.JPG (6668 bytes)

mcH-ol.GIF (4834 bytes)

Code #	d1	d3	L1	L2	Z
U6100.610	16	15.5	19	7	8
U6100.682	20	19.2	25	9	10
U6100.772	25	24.0	30	12	12

MULTISPEED

nv-msp.JPG (5566 bytes)

msp-ol.GIF (3896 bytes)

Code #	d1	d3	L1	L2	r	Z
U6200.610	16	15.5	19	7	4	6
U6200.682	20	19.2	25	9	5	6
U6200.772	25	24.0	30	12	6	8

SPHERICUT

nv-spc.JPG (5746 bytes)

spc-ol.GIF (3949 bytes)

Code #	d1	d3	L1	L2	r
U6250.610	16	15.5	23	9	2
U6250.682	20	19.2	29	11	2
U6250.772	25	24.0	34	13.5	4

SHANKS

nv-sh1ld.JPG (6261 bytes)

Code #	d3	d2	L1	L2	L3
6400.100	16	10	70	21	40
6400.110	16	10	85	36	55
6400.130	20	14	76	25	50
6400.140	20	14	96	45	70
6400.160	25	16	89	32	82
6400.170	25	16	109	52	82

nv-sh2ld.JPG (6688 bytes)

Code #	d3	L1	L2	Deg	L3
6420.610	20	100	51	2	70
6420.682	25	116	59	2	84
6420.772	32	134	73	2	103

nv-set.JPG (10048 bytes)

NOVOSYS SETS

SET 16 mm

**Set contains:**
Versions:		Shanks	Also contains
U6470	.160	6400.100	Torque Wrench
	.180	6400.110	Hex Key
	.130	6420.110	Instructions
	.120		Case
	.110

SET 20 mm

**Set contains:**
Versions:		Shanks	Also contains
U6470	.260	6400.130	Torque Wrench
	.280	6400.140	Hex Key
	.230	6420.140	Instructions
	.220		Case
	.210

SET 25 mm

**Set contains:**
Versions:		Shanks	Also contains
U6470	.360	6400.160	Torque Wrench
	.680	6400.170	Hex Key
	.330	6420.170	Instructions
	.320		Case
	.310

CUTTERS FOR High Speed Aluminum Machining
will be available in the near future.

Also: Check out the FRAISA 'HX' REvolution
in carbide endmills for Solid Carbide Tools.

The HX Series covers an enormous range of machining applications in steels (not for Aluminum or Stainless) with a combination of innovative carbides, tool geometries and coatings.They can handle steel materials from HRc 25 through 68.

6485.100
6480.100 fits 20/16 6488.120 fits 32/25

Art. No.	D5348 = TiAln
	U5348 = TiAlCN

**Also: Please refer to the FRAISA HX brochure on the following**
Fraisa M7 - Rm 1800-2000 N/mm2 HRC 52-56
Fraisa M7 - HRC 56 - 60
Fraisa M7 - HRC > 60