|
|
|
|
Introducing 2 New Products from Switzerland:
| 1. ALESA Twist Milling Cutters |
| 2. BUCHER-MOTOREX 7755Aero Coolant for Metal Working |
Back to the current Precision Update Page |
| ALESA-TWIST are
patented design End & Face Mill Cutters with extremely low cutting forces and
unequalled cutting depth. These cutters excel when used on difficult materials such as
Uddeholm's CORRAX, INCONEL, Stainless Steel, Copper, and Aluminium. ALESA offers HSS-E
coated inserts as well as Carbide HM coated inserts for the perfect solution to the
most difficult metal cutting applications. |
 |
| Uddeholm Sweden has run extensive testing of all major
cutting tool brands and none compare to the effectiveness and long life of the Alesa-Twist. |
| Example | A. | 7075 Aircraft Aluminium material machined with a 40mm Diameter 4 flute Face Mill with .250" depth of cut running at 7500 rpm with 120 Inch/Min. feed, on a CAT 40 Machining Center using Motorex 7755Aero Coolant. |
| B. | Frame Milling 1000 N/m3 Steel with 50mm Diameter 5 flute Face Mill with .625" depth of cut x 1/8" thick, running at 5800 rpm. and 90 inches/min feed on a Hermle No. 40 spindle - Dry Cutting. |
| BUCHER AG MOTOREX has
developed a new coolant for Damiler-Benz Aerospace Airbus Swisscool type 7755Aero. This coolant is special in many ways, its highlights are: The safest coolant available, meeting the highest technical regulations of hazardous material (TRGS No. 611) It is free of secondary amines. It has no chlorine, sulfur and is nitride free. It has a high resistance against micro organisms. It exhibits exceptional cooling, thanks to a good rinsing performance. Does not leave sticky residues. Gentle to the skin. |
 |
For more information on these fine products click on the respective
logo's.
 |
 |
Nethost: Stargate Connections
